9 Do not attempt to remove the top cover. If any abnormal operation is observed, unplug the DVR immediately and contact technical support. Do
99 Config Changing Channel Information To change the channel information select Config, select Device Manage, and select the device where you woul
100 Config User Parameters To access this menu select Config from the Top Menu Bar and then select User Parameters. Add: This will allow
101 Config Path Parameters To access this menu select Config from the Top Menu Bar then select Path Parameters. Warning Volume: This will allow
102 Playback This screen will allow you to search, playback, and backup videos. To access this menu select the Playback button from the Top
103 Playback Use the bottom control panel for various video controls. The bottom bar will turn blue when in playback and backup. The indica
104 E-Map Configurations This will allow you to add an image of the location where the system is configured. You can place the cameras in th
105 Adding a new Map This will allow you to add a new map to the E-Map. To access this menu select E-Map from the Top Menu Bar and select the
106 Editing a Map This will allow you to edit a map by adding/deleting cameras. To access this menu select E-Map from the Top Menu Bar and
107 Editing the Map List This will allow you to edit the Maps in the Map List. To access this menu select E-Map from the Top Menu Bar and sele
108 This mobile application (Night Owl Lite) will offer a number of different features by accessing the DVR remotely on an iPad, iPhone, or
10 When a malfunction occurs, it may not be serious and can be corrected easily. The following information describes the most common problem
109 Device Page This page will allow you to add, edit and delete devices. Ensure that you have completed the Remote Access and Mobile Menu chapter
110 Adding / Editing a Device This screen will allow you to add / edit a device based on information that was gathered in the Remote Access
111 Control Panel This will allow you to perform different functions during live viewing on a mobile device. These will move a PTZ camera manua
112 This mobile application (ASee) will offer a number of different features by accessing the DVR remotely on a Blackberry, Symbian and Wind
113 To access on a Blackberry device follow the below steps. 1. Download and install the “Blackberry Desktop Manager” on your computer. 2. Conne
114 Using ASee on a Blackberry device. Please ensure you have edited the ASee Application permission. Select “Settings” > “Options” >“
115 User Interface for Blackberry Devices The functions of the various icons are as follow: 1 - Connect/Disconnect 2 - Full screen 3 - Snapshot 4
116 To access on a Windows Mobile device follow the below steps. 1. Install the webcam program that is included on the supplied CD by copyi
117 After installation is complete on the Windows Mobile device, select the icon named “Asee” to run the program. This will display the program sc
118 To access on a Symbian device follow the below steps. 1. Install the ASee application that is on the included CD by copying the “ASee_A
11 Chapter 5 Troubleshooting
119 Once the installation is complete on the Symbian device, go to the Applications folder and select the “Asee” program. Select “Open” to display
120 Chapter 24 Specifications of DVR
121 Be sure to write down all of the important information below and place in a secure location. General DVR Information: Admin Password:
122 NIGHT OWL, LLC (“Night Owl”) provides the following warranty to the original retail purchaser only (the “Purchaser”) with respect to thi
123 Except as otherwise prohibited by law, this warranty is in lieu of other warranties, express or implied, and Night Owl neither assumes nor aut
124 Disclaimer Certain uses, publication and/or distribution of video/audio recordings from security cameras and/or audio devices are prohib
125
12 6.1 Back Panel of DVR Chapter 6 Layout of DVR Components
13 6.2 Front Panel of DVR Chapter 6 Layout of DVR Components
14 6.3 Mouse You can use a mouse instead of the remote control to navigate through your DVR’s menus. Connect the included mouse to the USB p
15 6.4 Remote Control Use the remote control to navigate through the DVR’s menus. Item Functions 1-0 Select channels / Input numbers in
16 7.1 Connecting the Power Supply 1. Plug the included power supply into the DVR. 2. Plug the other end of the power adapter cable int
17 7.2 Connecting the DVR to a TV or Monitor Using the supplied BNC to RCA connector 1. Connect the BNC to RCA connector to the back of the DVR’
18 8.1 Connecting Cameras to the DVR 1. Your DVR system comes with one 60 foot coaxial cable per camera. Connect each cable to a camera usi
19 8.2 Mounting the Cameras 1. Choose a Position: Decide where you would like to mount the camera. 2. Screw Positions: Mark three holes on the s
20 9.1 System Initialization After connecting the power adapter, the system will automatically start up and display the Night Owl logo while
21 9.2 On-Screen Display The on-screen display will also show the following information. Date & Time: Displays the date and time on the sys
22 Use the Quick Function menu to access several system options, including the Main Menu. To open the quick function menu, right-click anywh
23 Use the Main Menu to access the System Menu, Record Functions Menu, Playback Menu, Camera Menu, and Network Menu. These menus will allow you to
24 System Menu Use this menu to access the Date/Time, Password, Language and Advanced menus. Use the Advanced menu to access the Hard Dr
25 12.1 Time Setting Menu It is highly recommended to set up the Date and Time when first setting up your system. You can also configure Daylight
26 12.1.1 DST Setting Submenu The DST Setting Submenu is used to configure Daylight Saving Time settings. To access the DST Setting Submen
27 12.2 Password Menu Use this menu to change the user name, passwords, and permissions of the admin and the users from the User Setup menu. To
28 12.2.1 User Password Setup Submenu Use this submenu to change the user names and passwords and to enable user names and passwords. To acc
2 Chapter 1 FCC Radiation Norm ... 5 Chapter 2 Package Contents ...
29 12.2.2 User Authority Submenu Use this submenu to grant the users access to specific menus of the DVR. To access the User Authority Submenu sel
30 12.3 Language Menu Use this menu to change the displayed language the DVR’s menus. To access the Language Menu select System from the Mai
31 12.4 HDD Management Menu The HDD Management Menu shows the capacity and available recording time of the installed hard drive (HD) and to config
32 12.5 Video Audio Setup Menu Use the Video Audio Setup Menu to set the video system, monitor resolution, output device, rotation time and
33 12.6 Maintain Menu Use the Maintain Menu to update the system’s firmware, restore factory default settings, and set an automatic system reboot
34 12.6.1 Load Defaults Submenu Use this submenu to choose which menus that you would like to load factory defaults. To access this submenu
35 12.6.2 Log Submenu Use this submenu to list all actions of the DVR. To access this submenu select System from the Main Menu, and then select
36 12.7 Firmware Update Your system will periodically need a firmware update to ensure optimal performance. Visit www.NightOwlSP.com to chec
37 12.8 System Information Menu This menu lists various pieces of information about the DVR system. It is recommended to leave the Device Name a
38 Record Functions Menu Use this menu to access the Record Menu, Time Sechedule Submenu, Motion Menu, Motion Detection Mask Submenu, and th
3 12.3 Language Menu ... 30 12.4 HDD Management Menu ...
39 13.1 Record Menu The Record Menu allows you to create personalized settings to each individual video channel. To access the Record Menu select
40 13.1.1 Resolution Choose between D1 (704x480) (High), HD1 (704x240) (Medium), or CIF (352x240) (Low) resolutions to record videos. To h
41 13.1.2 Framerate Setup Submenu Use this submenu to allocate the FPS per channel. To access this submenu select Record Functions from the Main M
42 13.1.3 Record Schedule Submenu Use this submenu to configure the recording schedule of the DVR. To access the Record Schedule Submenu, s
43 13.2 Motion Detect Menu The Motion Detect Menu allows you to configure the motion detection settings of the DVR. To access the Motion Detect
44 13.2.1 Detection Area Submenu The Detection Area Submenu allows you to set the area where you want motion to be detected. To access the
45 13.3 Alarm Setup Menu Use this menu to configure the alarm, pre-recording and post recording settings. To access the Alarm Setup menu select
46 Use the Playback Menu to search and playback previously recorded files. To access the Record Search menu select Playback from the Main
47 14.1 Playback Screen This is the screen you will see during the playback of any recorded videos. To access this screen you will need to search
48 14.2 Detail Files Submenu (Backup Files) Use the Detail Files Submenu to backup previously recorded files onto a USB drive. To access the
4 Chapter 17 Network Menu ... 57 17.1 Internet/LAN Menu ...
49 Converting the .246 files to AVI format allows you to playback the recorded files in most multimedia players. AVI conversion involves selectin
50 Use this menu to access the Camera Settings Menu, Color Setup Submenu, Privacy Zone Submenu, and PTZ Menu. Chapter 16 Camera Menu Be
51 16.1 Camera Settings Menu Use the Camera Menu to customize channel titles, show/hide the date and time in live viewing and playback, and enable
52 16.1.1 Privacy Zone Submenu Use the Privacy Zone Submenu to mask certain areas of the scree. To access the Camera Setting Menu select Cam
53 16.1.2 Color Setup Submenu Use this menu to change the hue, brightness, contrast, and saturation color settings of each camera. To access the C
54 16.2 PTZ Menu Use the PTZ setup menu to configure settings for a connected PTZ camera (not included). To access the PTZ Setup menu se
55 16.3 PTZ Quick Functions Use the PTZ Quick Functions to control a connected PTZ camera (not included). To access the PTZ Quick Functions right
56 16.3 PTZ Quick Functions Use the PTZ Quick Functions to control a connected PTZ camera (not included). To access the PTZ Quick Functions
57 Use this menu to access the Internet/LAN Menu, DDNS Submenu, Mobile Menu, and Email Menu. This will explain the informaiton in each menu. Compl
58 17.1 Internet/LAN Menu Use this menu to configure the type of internet connection, the media and web ports, IP address, Subnet Mask, Gate
5 FCC This equipment has been tested and found to comply with limits for Class B digital device pursuant to Part 15 of Federal Communications Comm
59 IP Address: This is the identification of the DVR when it is connected to a network. Subnet Mask: This should always be set to 255.255.2
60 17.1.1 DDNS Setting Submenu Use this menu to configure DDNS setup after you have registered for a free domain name at http://www.nightowl
61 17.2 Mobile Menu Use this menu to configure the mobile port, mobile user name and mobile password settings. To access this menu select Netwo
62 17.3 Email Menu Use this menu to configure the email alert settings. To access this menu select Network from the Main Menu and then s
63 Use this chapter to connect your DVR to the Internet. This chapter will teach you how to properly connect your DVR to your router/modem, port c
64 18.1 Connection of DVR and Router/Modem Use this section to show you how to connect the DVR to the router/modem. DVR 1. Make sure that
65 18.2 Windows Network Configuration Determine Basic Information about Your Network Ensure that the DVR is properly connected to the router/mode
66 4. Find the IPv4 Address (or may be named IP Address in some versions of Windows). 5. Change the last digits to 150. Example, you w
67 Changing the Network Settings on the DVR Use the information that you just wrote down for the next steps. Access the Internet/LAN Menu by selec
68 18.3 Apple (Mac) Network Configuration Determine Basic Information about Your Network Ensure that the DVR is properly connected to the r
6 Your new DVR Security Kit will contain the following items. 8 Channel DVR Power Adapter 12V 2A Remote Control USB Mouse BN
69 Changing the Network Settings on the DVR Use the information that you just wrote down for the next steps. Access the Internet/LAN Menu by sele
70 Port Forwarding After you have configured the Network Settings, you will now need to forward the necessary ports to be able to view the D
71 5. You will need to enter a separate port forwarding entry for each port that your DVR uses – Media Port (9000), Web Port (80), and Server Por
72 19.1 Checking the Ports after Port Forwarding Once you have forwarded the necessary ports on your router, you should check to ensure that
73 20.1 Registering a Free Domain Name (DDNS) This option allows you to set up a free website address that will point back to the DVR regardless i
74 4. Create a domain name. 5. If your domain name that you have chosen is available, you will receive a window that says that your doma
75 20.2 Adding your New Domain Name to your DVR Use DDNS Submenu to configure DDNS setup after you have registered for a free domain name. To a
76 Use this software to access your DVR remotely over the Internet or within your local area network. Ensure that you have completed Chapter
77 NetViewer Login IP Address: Using the software on the same network as the DVR, you will enter the internal IP Address that you assigned to t
78 NetViewer Interface Channel Information The channel names, date and time will be indicated on every channel in real time. Menu Bar This
7 Please be sure the computer that you will use the LTE DVR Security Kit with complies with the following specifications: IBM PCs or 100% Compa
79 Play Control This will stop and play the live video feed. This will take a snapshot of the video. This will start and stop recordi
80 PTZ Control These control settings can only be used for cameras that have the Pan, Tilt, and Zoom features. A PTZ camera is not included.
81 Playback This screen will allow you to search, playback, and backup recorded videos. To access this menu select the Playback button from the Me
82 Playback Use the bottom control panel for various video controls. The circle indicator on the bottom bar will show the current locati
83 Remote Setting This screen will allow you to access all of the DVR setting menus. The menus will include the Record, Network, Camera, and Syste
84 Local Setting This screen will allow you to choose where recordings, snapshots, and file downloads are saved on the remote computer. To a
85 Firmware Update This screen will allow you to perform a firmware update to the DVR remotely. To access this menu select Firmware Update from t
86 Control Management Software (CMS – Video Client) Use this software to access one or more DVRs remotely over the Internet or within your l
87 Starting the CMS You will have to register an administrator when starting the CMS. User Name: Create a user name with a maximum of 12 char
88 Device List This menu will show all DVRs that have been added to the CMS. Search Field: This will allow you to search for a specific
8 Use provided power adapter. Do not use this product with a power source that applies more than specified voltage (100-240V AC). Neve
89 Device List Settings of the Device To access these options, right click on the device you would like to configure. Login: This will log you
90 Device List Remote Setup To access these menu options, right click on the device you would like to configure and select Remote Setup. The
91 Live Screen To access the live screen menu, right click anywhere on the channel. Capture: This will take a snapshot of the channel you ar
92 PTZ Control These control settings can only be used for cameras that have the Pan, Tilt, and Zoom features. A PTZ camera is not included.
93 PTZ Control Preset Tab This will allow you to set specific points to move the camera to from the current position. To add a preset point perfo
94 PTZ Control Cruise Tab This will allow the camera to move to the preset points that have been configured in the preset tab. To start a cr
95 Top Menu Bar Live: This will show live viewing of the channels. Playback: This will open the Playback screen. E-Map: This will open th
96 Bottom Menu Bar This will hide/show the side bar. This will allow you to adjust the volume. This will allow you to turn the P
97 Config Device Manage To access this menu select Config from the Top Menu Bar and then select Device Manage. Add: This will allow you to add
98 Config Adding a Device To add a device select Config, select Device Manage, and select the group where you would like to add the device.
Kommentare zu diesen Handbüchern